No products in the cart.
CMC Power Tilt & Trim
Showing all 7 results
-
CMC Power Tilt & Trim, CMC Spare Parts
CMC 13022 Adapter Kit for Transom Clamp Motors
- Heavy-duty aluminum construction
- Waterproof 12V marine hydraulic system
- Ideal for freshwater or saltwater applications
- Promotes quicker out-of-the-hole starts, increased top-end speed, better gas mileage
- Includes stainless steel hardware, wire assembly and switch
SKU: 13022£95.00 Add to cart -
CMC Power Tilt & Trim, CMC Spare Parts
CMC PT-130 Power Tilt and Trim up to 130hp Outboard Power Tilt
- Heavy-duty aluminum construction
- Waterproof 12V marine hydraulic system
- Ideal for freshwater or saltwater applications
- Promotes quicker out-of-the-hole starts, increased top-end speed, better gas mileage
- Includes stainless steel hardware, wire assembly and switch
SKU: 13001 & 13002£749.00 – £849.00 Select options -
CMC Power Tilt & Trim, CMC Spare Parts
Power Trim & Tilt
CMC PT-35
Fatures:
- Rated for 35 horse power and Smaller Motors.
- 5 1/2″ Set Back to Enhance Boat Stability and Performance.
- 84° of Trim and Tilt.
- 1/4″ 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.
- Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
- Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter.
- Weighs Only 24 Pounds!
Note: The inside dimension of the motor mounting area of the PT-35 is 11 inches. Before ordering, please make sure that the maximum width of the clamp mounting feet and/or mounting bolts of themotor thatmust fit into this area does not exceed this 11 inch limit. Mounting bolts are not included with the PT-35.
CMC PT-130
Fatures:
- Available with or without guage
- Rated for 130 H.P. and Smaller Motors.
- 6″ Set Back to Enhance Boat Stability and Performance.
- 20° of Trim and a Total of 90° of Tilt and Trim.
- 1/2″ 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.
- Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
- Standard B.I.A. Bolt Hole Pattern.
- Convenient Adapter Kit Available for Clamp-on Motors.
- Four Stainless Steel Motor Mounting Bolts Included.
SKU: n/a£649.00 – £749.00 Select options
-
CMC Power Tilt & Trim, CMC Spare Parts
CMC 13022 Adapter Kit for Transom Clamp Motors
- Heavy-duty aluminum construction
- Waterproof 12V marine hydraulic system
- Ideal for freshwater or saltwater applications
- Promotes quicker out-of-the-hole starts, increased top-end speed, better gas mileage
- Includes stainless steel hardware, wire assembly and switch
-
CMC Power Tilt & Trim, CMC Spare Parts
CMC PT-130 Power Tilt and Trim up to 130hp Outboard Power Tilt
- Heavy-duty aluminum construction
- Waterproof 12V marine hydraulic system
- Ideal for freshwater or saltwater applications
- Promotes quicker out-of-the-hole starts, increased top-end speed, better gas mileage
- Includes stainless steel hardware, wire assembly and switch
-
-
CMC Power Tilt & Trim, CMC Spare Parts
Power Trim & Tilt
CMC PT-35
Fatures:
- Rated for 35 horse power and Smaller Motors.
- 5 1/2″ Set Back to Enhance Boat Stability and Performance.
- 84° of Trim and Tilt.
- 1/4″ 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.
- Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
- Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter.
- Weighs Only 24 Pounds!
Note: The inside dimension of the motor mounting area of the PT-35 is 11 inches. Before ordering, please make sure that the maximum width of the clamp mounting feet and/or mounting bolts of themotor thatmust fit into this area does not exceed this 11 inch limit. Mounting bolts are not included with the PT-35.
CMC PT-130
Fatures:
- Available with or without guage
- Rated for 130 H.P. and Smaller Motors.
- 6″ Set Back to Enhance Boat Stability and Performance.
- 20° of Trim and a Total of 90° of Tilt and Trim.
- 1/2″ 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.
- Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
- Standard B.I.A. Bolt Hole Pattern.
- Convenient Adapter Kit Available for Clamp-on Motors.
- Four Stainless Steel Motor Mounting Bolts Included.
-
CMC Power Tilt & Trim, CMC Spare Parts
CMC 13022 Adapter Kit for Transom Clamp Motors
- Heavy-duty aluminum construction
- Waterproof 12V marine hydraulic system
- Ideal for freshwater or saltwater applications
- Promotes quicker out-of-the-hole starts, increased top-end speed, better gas mileage
- Includes stainless steel hardware, wire assembly and switch
£95.00 Add to cart -
CMC Power Tilt & Trim, CMC Spare Parts
CMC PT-130 Power Tilt and Trim up to 130hp Outboard Power Tilt
- Heavy-duty aluminum construction
- Waterproof 12V marine hydraulic system
- Ideal for freshwater or saltwater applications
- Promotes quicker out-of-the-hole starts, increased top-end speed, better gas mileage
- Includes stainless steel hardware, wire assembly and switch
£749.00 – £849.00 Select options -
CMC Power Tilt & Trim, CMC Spare Parts
Power Trim & Tilt
CMC PT-35
Fatures:
- Rated for 35 horse power and Smaller Motors.
- 5 1/2″ Set Back to Enhance Boat Stability and Performance.
- 84° of Trim and Tilt.
- 1/4″ 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.
- Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
- Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter.
- Weighs Only 24 Pounds!
Note: The inside dimension of the motor mounting area of the PT-35 is 11 inches. Before ordering, please make sure that the maximum width of the clamp mounting feet and/or mounting bolts of themotor thatmust fit into this area does not exceed this 11 inch limit. Mounting bolts are not included with the PT-35.
CMC PT-130
Fatures:
- Available with or without guage
- Rated for 130 H.P. and Smaller Motors.
- 6″ Set Back to Enhance Boat Stability and Performance.
- 20° of Trim and a Total of 90° of Tilt and Trim.
- 1/2″ 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.
- Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
- Standard B.I.A. Bolt Hole Pattern.
- Convenient Adapter Kit Available for Clamp-on Motors.
- Four Stainless Steel Motor Mounting Bolts Included.
£649.00 – £749.00 Select options