Black Max (10 7/8 x 11″) Mercury RH Propeller for 25hp Mercury/Mariner & 60hp Bigfoot/Command Thrust Outboard, 48-85632A45

£204.77

Preorder. This item is very much in demand. Pre-order to get your hands on the very next one available - it’s only £100 deposit to secure your spot!

Compare
SKU: BRS-48-85632A45 Categories: , ,

Specs:

  • 10 7/8″ Diameter
  • 11″ Pitch
  • Right Hand Rotation
  • Equipped with Flo-Torq Reflex Hub (#835257K12)
  • High Quality die-cast 3 or 4 blade aluminum
  • Attractive and durable high-gloss Phantom Black finish
  • Easy to maintain & repair.
Fitment: Mercury Outboards: Mercury/Mariner 25 HP  Bigfoot/Command Thrust 60 HP Outboard
  • 25 HP Bigfoot/Command Thrust (CT) (4-Stroke)
  • 30 HP 2-Stroke
  • 30 HP Bigfoot/Command Thrust (CT) 2010 and Newer
  • 30-40 HP SeaPro/Marathon
  • 30 (4-Stroke) 1994-2005
  • 40-60 HP 2-Stroke and 4-Stroke (Not BigFoor/CT) 1977 and Newer
  • SeaPro/Marathon 55 HP
  • 13 Tooth Spline
  • Note: for older rubber hub propellers – use Merucyr hardware kit 11-31990Q02
  • Note: Propeller hardware is not compatible between rubber hub propellers and Flo-Torq Reflex propellers

Description

For good overall performance and value, the Black Max is your prop. The Black Max aluminum propellers are standard equipped on most boats with Mercury/Mariner/MerCruiser power. Recommended for use on boats with up to 250 HP and with a top speed of less than 50 MPH. Pontoon style props available.

APPLICATION:
  • Mercury 25hp Outboard Propeller
  • Mariner 25hp Outboard Propeller
  • Bigfoot/Command Thrust 25hp  Outboard
  • Bigfoot/Command Thrust 30hp  Outboard
  • Bigfoot/Command Thrust 40hp  Outboard
  • Bigfoot/Command Thrust 60hp  Outboard

SPORT SERIES Black Max®

Well Balanced, for Better Boating

A perfect match for engines under 250 hp.

  • Available pitches 10, 10.5, 11, 11.5, 12, 12.5, 13, 14, 15, 16, 17, 18, 19, 21, 23, 5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5
  • Rotation RH
  • Performance vent system (PVS) No
  • Boat types Houseboat, Inflatable – Soft Hull, Inshore Fishing, Pontoon
  • Number of blades 3, 4
  • Material Mercalloy
  • Fits All outboards, Alpha drive
  • Recommended for Engines less than 250hp, Top speed less than 50 mph / 80 kph

FEATURES:

Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.

 

Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.

 

Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.

 

Flo-Torq SSR

The Flo-Torq SSR utilizes Mercury’s proven Soft-Shift Rubber technology in a quiet hub kit that provides an NVH upgrade for Flo-Torq II hub applications where the maximum reduction of noise, vibration, and harshness is desired.

SSR
Helps preventing shifting noise and propeller rattle while providing maximum durability for smaller and mid-range horsepower outboards.

SSR Solid
Helps prevent shifting noise and propeller rattle while providing maximum durability in higher performance applications with 1” propeller shaft.

SSR HD
Helps prevent shifting noise and propeller rattle while providing maximum durability in higher performance applications with 1.25” propeller shaft.

Social Share

Additional information

Weight5 kg
For Engine Brand

,

Material

Color

Pitch

Rotation

No. of Blades

,

Boat Types

, , ,

Fitment

, , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Menu