Bravo I XS Pro Finished (15 1/4 x 26″) Mercury RH Propeller For 135/400hp Mercury/Mariner & 90/115hp Mercury Command Thrust Outboard, 48-831914L60

£1,053.53

Preorder. This item is very much in demand. Pre-order to get your hands on the very next one available - it’s only £100 deposit to secure your spot!

Compare
SKU: BRS-48-831914L60 Categories: , ,

Specs:

  • Hub kit sold separately; 835257K6 and  835258K2 for 1″, and 840389K06 for 1.25″ propshafts.
  • Equipped with Performance Vent System (PVS) allowing exhaust adjustment for planing
  • The 4 blades offer great handling
  • Excellent mid-range acceleration and the tuned exhaust tube provides bow and stern lift for awesome top end speeds
  • Excellent prop for heavy and fully loaded walleye, bass, flats and some ultra-high speed bass boats
  • If running a 3-blade prop move up 1″ of pitch to Bravo I XS
  • If replacing the Fury, Revolution 4, or standard Bravo I move up 2″of pitch
  • If the application requires a lower pitch consider the 20 and 21 inch Bravo I FS
Fitment: Mercury /Mercruser Engines.
  • Mercury/Mariner 90/115 CT, All 135-250 HP Outboards and 300 HP Verado with 1″ Shaft – use hub kit #835257K1
  • MerCruiser 120-375 HP Alpha & Bravo I sterndrives – use hub kit #835257K1
  • MerCruiser 400+ HP Bravo I sterndrives – use hub kit #835258K2
  • Mercury 250 Pro XS with Torque Master II, 350 Verado, 350 SCI, 400R with 1.25″ shaft – use hub kit #840389K06
  • MerCruiser XZ and XR Racing Sport and Torque Master 1.25″ shaft – use hub kit #840389K06
    • Note: To reduce clutch rattle on 40-60 HP CT and 75-115 HP – use hub kit #835257K9
    • Note: To reduce clutch rattle on 90/115 HP CT, 150 FourStroke and 150-200 4-cyl Verado – use hub kit #835257K10
    • Note: Surfacing applications with 200+ HP outboards with 1″ shaft – use hub kit #835258K2
  • Non-Mercury Engines: Non-Mercury Outboard/Sterndrive, 4-3/4″Gearcase
  • Evinrude/Johnson/OMC 1991 and newer – use hub kit #835265Q02
  • Evinrude/Johnson/OMC 1990 and older – use hub kit #835267Q1
  • Honda 135-225 HP – use hub kit #835278Q1
  • Suzuki 150-300 HP – use hub kit #835281Q1
  • Yamaha 150 -300 HP – use hub kit #835274Q1
  • Yamaha 200-250 HP SHO – use hub kit #8M0075402

Description

We try to keep several of the Mercury Racing Bravo I FS propellers on hand and readily available. However, these propellers have a longer lead time from Mercury Racing, thus they take longer to re-stock in the event that we sell out. We always advise that you contact us prior to purchasing to confirm availability.

The Mercury Bravo 1 is a 4-blade stainless steel propeller for high-performance, high drive height, outboard and sterndrive applications. With the introduction of the four-blade Bravo FS, bass, multispecies, bay boat, and center-console applications have realized much quicker planing compared to three-blade propellers. In addition, the Bravo FS provides a much smoother ride by improving the angle of attack. By switching to a Bravo FS, the engine can be raised as much as an inch, getting the most performance of any engine application and improving the driving experience. For some stepped hulls, the Bravo FS offers more bow lift than the Rev 4, improving ride quality because the boat rides on the steps correctly.

APPLICATION:
  • Mercury 135hp Outboard Propeller
  • Mercury 400hp Outboard Propeller
  • Mariner 135hp Outboard Propeller
  • Mariner 400hp Outboard Propeller
  • Bigfoot/Command Thrust 90hp  Outboard
  • Bigfoot/Command Thrust 115hp  Outboard
  • Yamaha 150hp  Outboard
  • Yamaha 200hp  Outboard
  • Yamaha 250hp  Outboard
  • Yamaha 300hp  Outboard
  • Honda 135hp  Outboard
  • Honda 225hp  Outboard
  • Suzuki 150hp  Outboard
  • Suzuki 300hp  Outboard

FEATURES:

Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.

 

Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.

 

Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.

 

Flo-Torq SSR

The Flo-Torq SSR utilizes Mercury’s proven Soft-Shift Rubber technology in a quiet hub kit that provides an NVH upgrade for Flo-Torq II hub applications where the maximum reduction of noise, vibration, and harshness is desired.

SSR
Helps preventing shifting noise and propeller rattle while providing maximum durability for smaller and mid-range horsepower outboards.

SSR Solid
Helps prevent shifting noise and propeller rattle while providing maximum durability in higher performance applications with 1” propeller shaft.

SSR HD
Helps prevent shifting noise and propeller rattle while providing maximum durability in higher performance applications with 1.25” propeller shaft.

Social Share

Additional information

Weight5 kg
For Engine Brand

,

Material

Color

Pitch

No. of Blades

Rotation

Boat Types

, , ,

Fitment

, , , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Menu