Bravo Three XR Pro Finished (14 3/4 x 25″) Mercury RH Propeller for 250hp / 525hp Mercury/Mariner Outboard, 48-842944L70

£1,107.36

Preorder. This item is very much in demand. Pre-order to get your hands on the very next one available - it’s only £100 deposit to secure your spot!

Compare
SKU: BRS-48-842944L70 Categories: , , ,

Specs:

  • Three-Blade, Rear, High Gloss Finish
  • Hardware sold separately (not included with propeller)
  • As a general rule the odd pitch numbered Bravo Three XR propellers run similar engine RPM to the next higher pitch even numbered Bravo Three Propellers.
  • For example the Bravo Three XR 27″ pitch matches the RPM of a Bravo Three 28″ pitch
  • Front and Rear Props Sold Separately, Image is representative image only.
Mercury Mercruiser: Bravo Three
  • All Bravo Three engines
  • 4-Blade front, 3-Blade rear propellers
  • If boat is propped correctly with original Bravo Three propellers then drop down 1″ pitch to maintain engine RPM with Bravo Three Diesel propellers
  • Bravo Three Propeller Hardware (not included with propellers):
  • Forward Thrust Washer #805101T
  • Aft Thrust Washer #805100
  • Forward Prop Nut #859131
  • Aft Prop Nut #862907
  • Bravo Three Inner Prop Nut Wrench #805457T1

Description

“FRONT & REAR PROPELLERS SOLD SEPARATELY, IMAGE IS REPRESENTATIVE IMAGE ONLY”

Designed for 250-525 HP gas and diesel powered sport cruisers and performance Bravo Three applications. A large diameter 4-blade forward propeller followed by a smaller diameter 3-blade aft propeller feature built in cup for incredible handling, improved fuel economy at cruise, and boat control. Intended for the Bravo Three XR drive and can be used with the Bravo Three and Bravo Three X drives. The even pitch is made from the odd pitch casting; Mercury Racing adds additional cup for increased holding. The Pro Finish provides a performance leading edge, consistent cup heights, zero balanced for minimal vibration and durable high luster finish.

APPLICATION:
  • Mercury 225hp Outboard Propeller
  • Mercury 250hp Outboard Propeller
  • Mercury 300hp Outboard Propeller
  • Mercury 350hp Outboard Propeller
  • Mercury 400hp Outboard Propeller
  • Mercury 450hp Outboard Propeller
  • Mariner 500hp Outboard Propeller
  • Mariner 525hp Outboard Propeller

Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.

Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.

Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.

 

Social Share

Additional information

Weight5 kg
For Engine Brand

,

Material

Color

Pitch

No. of Blades

Rotation

Boat Types

, , , , , , , , ,

Fitment

, , , , , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Menu