Revolution 4 Lab Finished (14 5/8 x 22″) Mercury RH Propeller For 90/115hp Mercury/Mariner & 135-350hp Command Thrust, Optimax and Verado Outboard, 48-8M0106546

£1,471.61

Preorder. This item is very much in demand. Pre-order to get your hands on the very next one available - it’s only £100 deposit to secure your spot!

Compare
SKU: BRS-48-8M0106546 Categories: , , ,

Specs:

  • Hub kit not included, may be purchased separately.
  • Left-Hand Rotation (Counter Rotating) – No Returns!
  • Equipped with Performance Vent System (PVS) – solid fittings for sterndrive applications, for outboard applications replace with medium PVS fittings.
  • Improves mid-range, strong acceleration and top speed
  • Expected to increase 150 RPM over the stock Revolution 4.
  • Available for separate purchase Flo-Torq II SS (Solid) Hub kit #835258K2 (for 1″ propshaft)
  • Available for separate purchase Flo-Torq II 1 1/4″ Heavy Duty SS (Solid) Hub kit #840389K06 (for 1.25″ propshaft)
Fitment: Mercury Outboards: Mercury/Mariner EFI, 90/115 hp , Command Thrust, Optimax and Verado Outboard 135-350hp
  • 135-350 HP 1978 and Newer, and 90/115 CT 2014 and Newer
  • 15 Tooth Spline
  • Note: Use Flo-Torq IV hub kit (#835257K10) to reduce clutch rattle on 90/115 HP Command Thrust (CT), 135-200 HP 4 cylinder Verado and 150 FourStroke. Clutch rattle may be present when using 18P or lower stainless steel propellers.
  • 350 Verado SCI requires hub kit #840389K06
Mercury Mercruiser; Mercury Mercruiser Alpha & Bravo One
  • Alpha and Bravo One Sterndrives – All Horsepowers
  • 15 Tooth Spline
  • For 400HP+ Use Flo-Torq solid hub assembly. Replace A46 with A55 or order hub kit part number #835258K2
  • For Bravo One XR and XZ drives, Use Flo-Tor 1 1/4″ hub assembly. Replace A46 with A65 or order hub kit part number #840389K06
Non-Mercury Engines: Non-Mercury Outboard/Sterndrive, 4-3/4″ Gearcase
  • Evinrude/Johnson/OMC 1991 and newer – use hub kit #835265Q02
  • Evinrude/Johnson/OMC 1990 and older – use hub kit #835267Q1
  • Honda 135-225 HP – use hub kit #835278Q1
  • Suzuki 150-300 HP – use hub kit #835281Q1
  • Yamaha 150 -300 HP – use hub kit #835274Q1
  • Yamaha 200-250 HP SHO – use hub kit #8M0075402

Description

Mercury Racing Revolution 4 Lab Finished is designed to increase speed for dual center console boats, V-6 outboard walleye. For V-6 outboards and Alpha and Bravo One and TRS sterndrives.

APPLICATION:
  • Mercury 90hp Outboard Propeller
  • Mercury 115hp Outboard Propeller
  • Mariner 90hp Outboard Propeller
  • Mariner 115hp Outboard Propeller
  • Bigfoot/Command Thrust, Optimax, and Verado 135hp  Outboard
  • Bigfoot/Command Thrust, Optimax, and Verado 150hp  Outboard
  • Bigfoot/Command Thrust, Optimax, and Verado 200hp  Outboard
  • Bigfoot/Command Thrust,Optimax and Verado 250hp  Outboard
  • Bigfoot/Command Thrust,Optimax and Verado 300hp  Outboard
  • Bigfoot/Command Thrust,Optimax and Verado 350hp  Outboard

Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.

Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.

Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.

Social Share

Additional information

Weight5 kg
For Engine Brand

,

Material

Color

Pitch

No. of Blades

Rotation

Boat Types

, ,

Fitment

, , , , , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Menu