Trophy Plus (13.8 x 17″) Mercury RH Propeller For 75/125hp & 135/400hp Mercury/Mariner and 40/60hp & 90/115hp Bigfoot Command Thrust Outboard, 48-8M0151389

£633.88

Preorder. This item is very much in demand. Pre-order to get your hands on the very next one available - it’s only £100 deposit to secure your spot!

Compare
SKU: BRS-48-8M0151389 Categories: , , ,

Specs:

  • Hub kit sold separately, see the fitment information below to select the correct hub kit for your application.
  • Right hand rotation propeller (clockwise rotation)
  • Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization
  • The 17P propeller comes equipped with solid PVS plugs installed
  • Propeller hub measure 4.25″ diameter, when using on 4.75″ gearcase applications and exhaust venting is excessive, install seal ring #878421
Fitment: Mercury Outboards: Mercury 75/125 HP, Bigfoot Command Thrust 40/60 HP Outboard
  • 75-125 HP Outboards, 1978 and newer
  • Use Hub Kit #835257K6 on all 2-Stroke applications
  • Use Hub Kit #8M0150151 for all 4-Stroke applications*
  • 40-60 HP Bigfoot/Command Thrust (CT), All Years
  • Note: This will only fit the 40-60 HP Command Thrust & Bigfoot gearcase, it will not fit a standard gearcase 40-60 gearcase
  • Use Hub Kit #8M0150151*
Fitment: Mercury Outboards: Mercury 135/400 HP,  Command Thrust 90/115 HP Outboard
  • 135-400HP Outboards, 1978-Newer
  • Use Hub Kit #835257K6 for all 2-Stroke outboards
  • Use Hub Kit #8M0150151 for 135-225HP 4-Stroke outboards with 1.0″ prop shaft
  • Use Hub Kit #8M0101602 for 225+HP 4-Stroke outboards with 1.0″ prop shaft
  • Use Hub Kit #8M0101601 for all 1.25″ prop shaft applications (V8 Fourstroke & 350-450 Verado)
  • 90-115 HP Command Thrust (CT), 2014-Newer
  • Note: This will only fit the 90-115 HP Command Thrust gearcase, it will not fit a standard 90-115 HP gearcase
  • Use Hub Kit #8M0150151*
  • 90-115 HP Command Thrust (CT), 2014-Newer
  • Note: This will only fit the 90-115 HP Command Thrust gearcase, it will not fit a standard 90-115 HP gearcase
  • Use Hub Kit #8M0150151*
Non-Mercury  Outboard, 4.25″ Gearcase
  • Suzuki/Johnson 90-115 HP 4-Stroke (2001-2008) – Use Hub Kit #835283Q1
  • Suzuki/Johnson 100-115 HP 4-Stroke (2009 and newer), 140 HP 4-Stoke – Use Hub Kit #835283Q2
  • Suzuki 70-90 HP 4-Stroke (2009 and newer) – use Hub Kit #835283Q03
  • Honda 75-90 HP (1998 and older) – Use Hub Kit #835277Q1
  • Honda 75-90 HP (1999 and newer), 115-130 HP – Use Hub Kit #835279Q2
  • Yamaha 50-100 HP – Use Hub Kit #835272Q1
  • Yamaha 115-130 HP – Use Hub Kit #835271Q2
Non-Mercury  Outboard, 4.75″ Gearcase
  • Evinrude/Johnson/OMC (1991 and newer) – Use Hub Kit #8M0119081
  • Evinrude/Johnson/OMC (1990 and older) – Use Hub Kit #8M0119082
  • Evinrude E-TEC G2 (2015 and newer) – Use Hub Kit #8M0107220
  • Honda 135-225HP – Use Hub Kit #835278Q1
  • Suzuki 150-300HP – Use Hub Kit #835281Q1
  • Yamaha 150-300 HP including SHO (2015 and newer) – Use Hub Kit #835274Q1
  • Yamaha 200-250 HP SHO (2014 and older) – Use Hub Kit #8M0075402
  • Important Note: Propeller hub measure 4.25″ diameter, when using on 4.75″ gearcase applications and exhaust venting is excessive, install seal ring #878421

Description

The Mercury Trophy Plus propeller is a 4-blade propeller known for great acceleration and top speed on 75-225 HP outboards (except V8). The 17-19P is designed for 75-115 HP outboards with the higher pitch ranges for 115-225 HP outboards.

APPLICATION:
  • Mercury 75hp Outboard Propeller
  • Mercury 115hp Outboard Propeller
  • Mercury 125hp Outboard Propeller
  • Bigfoot/Command Thrust 40hp  Outboard
  • Bigfoot/Command Thrust 60hp  Outboard
  • Yamaha 50hp  Outboard
  • Yamaha 100hp  Outboard
  • Yamaha 115hp  Outboard
  • Yamaha 130hp  Outboard
  • Honda 75hp  Outboard
  • Honda 90hp  Outboard
  • Suzuki 70hp  Outboard
  • Suzuki 90hp  Outboard

FEATURES:

Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.

 

Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.

 

Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.

 

Flo-Torq SSR

The Flo-Torq SSR utilizes Mercury’s proven Soft-Shift Rubber technology in a quiet hub kit that provides an NVH upgrade for Flo-Torq II hub applications where the maximum reduction of noise, vibration, and harshness is desired.

 

Social Share

Additional information

Weight5 kg
For Engine Brand

,

Material

Color

Pitch

No. of Blades

Rotation

Boat Types

, , ,

Fitment

, , , , , , , , , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Menu