Bravo I LT Pro Finished (15 1/4 x 23″) Mercury RH Propeller for135hp & above Mercury/Mariner Outboard, 48-8M0121595

  1. Home
  2. Boat Accessories
  3. Propellers
  4. Mercury Marine Propellers
  5. Sport Series - Black Max Propellers
  6. 21" - 25" Pitch
  7. Bravo I LT Pro Finished (15 1/4 x 23″) Mercury RH Propeller for135hp & above Mercury/Mariner Outboard, 48-8M0121595

Bravo I LT Pro Finished (15 1/4 x 23″) Mercury RH Propeller for135hp & above Mercury/Mariner Outboard, 48-8M0121595

£813.26

The hand-crafted, stainless steel Bravo I LT props are designed to improve planing and trim response throughout the engine operating rpm range. The result? An increase in top-end speed by 1 to 1.5 mph!

The Bravo I LT features the Mercury® patented Performance Vent System® (PVS). PVS enables operators to dial-in their propeller for peak planing performance. The PVS® system works in concert with the LT’s robust blades that are hand blended and balanced by our propeller lab artisans.

A majority of Mercury Verado® and Mercury Pro FourStroke applications will use the Bravo I LT with all four vent holes plugged with solid PVS fittings. OptiMax 2-stroke applications require all four vent holes to be open. Upgrades from the Bravo I FS to the Bravo I LT require no change in pitch size when matching engine rpm.

Compare

Description

The Mercury Racing Pro Finish Bravo I LT Propeller is designed specifically for higher horsepower, single engine outboard powered bay boats and multi-species hulls under heavy loads.

APPLICATION:
  • Mercury 135hp Outboard Propeller
  • Mercury 150hp Outboard Propeller
  • Mercury 200hp Outboard Propeller
  • Mercury 225hp Outboard Propeller
  • Mercury 250hp Outboard Propeller
  • Mercury 300hp Outboard Propeller
  • Mariner 135hp Outboard Propeller
  • Mariner 150hp Outboard Propeller
  • Mariner 200hp Outboard Propeller
  • Mariner 225hp Outboard Propeller
  • Mariner 250hp Outboard Propeller
  • Mariner 300hp Outboard Propeller

FEATURES:

Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.

 

Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.

 

Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.

 

Flo-Torq SSR

The Flo-Torq SSR utilizes Mercury’s proven Soft-Shift Rubber technology in a quiet hub kit that provides an NVH upgrade for Flo-Torq II hub applications where the maximum reduction of noise, vibration, and harshness is desired.

SSR
Helps preventing shifting noise and propeller rattle while providing maximum durability for smaller and mid-range horsepower outboards.

SSR Solid
Helps prevent shifting noise and propeller rattle while providing maximum durability in higher performance applications with 1” propeller shaft.

SSR HD
Helps prevent shifting noise and propeller rattle while providing maximum durability in higher performance applications with 1.25” propeller shaft.

Social Share

Additional information

Weight5 kg
For Engine Brand

Mariner, Mercury

Material

Stainless Steel

Color

Silver

Pitch

23" Pitch

No. of Blades

4 blades

Rotation

Right Hand (RH)

Boat Types

Bass, Catamaran, Inshore Fishing, Offshore fishing

Fitment

135hp Outboard, 150hp Outboard, 200hp Outboard, 225hp Outboard, 250hp Outboard, 300hp Outboard

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Menu
[]