Spitfire Pontoon (13.8 x 10″) Mercury RH Propeller For 40hp Mercury/Mariner & 125hp Mercury Command Thrust Outboard, 48-8M8026555

  1. Home
  2. Boat Accessories
  3. Propellers
  4. Mercury Marine Propellers
  5. Elite Series - SpitFire
  6. 9"-15" Pitch
  7. Spitfire Pontoon (13.8 x 10″) Mercury RH Propeller For 40hp Mercury/Mariner & 125hp Mercury Command Thrust Outboard, 48-8M8026555

Spitfire Pontoon (13.8 x 10″) Mercury RH Propeller For 40hp Mercury/Mariner & 125hp Mercury Command Thrust Outboard, 48-8M8026555

£231.15

Specs:

  • Equipped with Flo-Torq II Hub kit #835257K1
  • 13.8″ Diameter
  • 10″ Pitch
  • Right Hand Rotation
  • 40-60 HP Bigfoot 4-strokes, 75-125 HP 2 and 4-stroke outboards
  • 10-13″ Pitches are designed to provide superior holding and lift for pontoon boats!
  • If engine RPM is appropriate with 3-blade prop, replace with the same pitch Spitfire propeller *According to Mercury Propeller Guide
Fitment: Mercury Outboards: Mercury/Mariner 40 HP,Bigfoot Command Thrust 125 HP Outboard
  • 40-60 HP BigFoot/Command Thrust (CT) All Years
  • 75-125 HP 1978 and Newer
  • 15 Tooth Spline
  • Note: Flo-Torq III Hub Kit 835257K9 is recommended for 40-60 HP BigFoot/Command Thrust (CT) and 75-115 HP Optimax to reduce clutch rattle
Non-Mercury  Engines;Non-Mercury  Outboard, 4-1/4 ” Gearcase
  • Non-Mercury Outboard (4-1/4 in. Gearcase)
  • Suzuki/Johnson 90-115 HP 4-Stroke 2001-2008 – use hub kit 835283Q1
  • Suzuki/Johnson 100-115 4-Stroke 2009 and Newer 140 HP 4-Stroke – use hub kit 835283Q2
  • Suzuki 70-90 HP 4-Stroke 2009 and Newer – use hub kit 835283Q03
  • Honda 75-90 HP 1998 and Older – use hub kit 835277Q1
  • Honda 75-90 HP 1999 and Newer, 115-130 HP – use hub kit 835279Q2
  • Yamaha 50-100 HP – use hub kit 835272Q1
  • Yamaha 115-130 HP – use hub kit 835271Q2
Compare

Description

Introducing the Spitfire – the world’s first performance aluminum propeller. Do you want to take your boats performance to the next level? The Spitfire provides 16-25% faster acceleration, superior holding with no penalty in top speed vs. a comparable 3 blade aluminum propeller.

APPLICATION:
  • Mercury 40hp Outboard Propeller
  • Mariner 40hp Outboard Propeller
  • Bigfoot/Command Thrust 125hp  Outboard
  • Yamaha 50hp  Outboard
  • Yamaha 100hp  Outboard
  • Yamaha 115hp  Outboard
  • Yamaha 130hp  Outboard
  • Honda 75hp  Outboard
  • Honda 90hp  Outboard
  • Suzuki 70hp  Outboard
  • Suzuki 90hp  Outboard
  • Suzuki 100hp  Outboard
  • Suzuki 115hp  Outboard
  • Johnson 90hp  Outboard
  • Johnson 100hp  Outboard
  • Johnson 115hp  Outboard

Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.

Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.

Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.

Social Share

Additional information

Weight5 kg
For Engine Brand

Mariner, Mercury

Material

Mercalloy

Color

Black

Pitch

10" Pitch

No. of Blades

4 blades

Rotation

Right Hand (RH)

Boat Types

Bass, Cruiser, Deckboat, Inflatable – Rigid Hull (RIB), Inflatable – Soft Hull, Inshore Fishing, Offshore fishing, Pontoon, Runabout – cuddy, Runabout – open bow

Fitment

100hp Outboard, 115hp Outboard, 125hp Outboard, 40hp Outboard, 50hp Outboard, 70hp Outboard, 75hp Outboard, 90hp Outboard

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Menu
[]