Trophy Sport (10 5/8 x 13″) Mercury RH Propeller for 25/60 HP Mercury/Mariner Outboard, 48-878614A46



  • Equipped with the Flo-Torq Reflex Hub Kit #835257K12 (Hub Kit Included)
  • Improves handling and reduces steering loads
  • According to the Mercury Propeller Handbook it is suggested that if engine RPMs are appropriate with 3-blade propeller, then replace with the same pitch Trophy Sport

Mercury 25 – 60 HP Outboard

  • 25HP Bigfoot/Command Thrust 4-Stroke
  • 30 HP 2-Stroke
  • 30 HP bigfoot/Command Thrust, 2010-Newer
  • 30-40 HP SeaPro/Marathon
  • 30 HP 4-Stroke, 1994-2005
  • 40-60 HP 2-Stroke and 4-Stroke, standard gearcase, 1977-Newer
  • 55 HP SeaPro/Marathon
  • 13 Tooth Spline
  • Note: This will only fit the 40-60 HP standard gearcase, it will not fit a 40-60 HP Bigfoot or Command Thrust gearcase

Preorder .This item is very much in demand. Pre-order to get your hands on the very next one available - it’s only £100 deposit to secure your spot!



The Mercury Trophy Sport is a 4-blade propeller for 30-60 HP powered fishing boats where performance needs to be maximized. The Trophy Sport is a no-compromise hole-shot and top speed propeller. Get the best out of your flats, walleye, bass boat, or inflatable.

  • Mercury 25hp Outboard Propeller
  • Mercury 30hp Outboard Propeller
  • Mercury 40hp Outboard Propeller
  • Mercury 55hp Outboard Propeller
  • Mercury 60hp Outboard Propeller
  • Mariner 25hp Outboard Propeller
  • Mariner 30hp Outboard Propeller
  • Mariner 40hp Outboard Propeller
  • Mariner 55hp Outboard Propeller
  • Mariner 60hp Outboard Propeller

Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.

Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.

Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.


Social Share

Additional information

Weight5 kg
For Engine Brand





No. of Blades


Boat Types

, , ,


, , , ,


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.