Vengeance (10 1/2 x 13″) Mercury RH Propeller For 25/60hp Mercury Outboard, 48-855858A46


Preorder. This item is very much in demand. Pre-order to get your hands on the very next one available - it’s only £100 deposit to secure your spot!

SKU: BRS-48-855858A46 Categories: , , ,


  • Equipped with Flo-Torq Reflex Hub Kit #835257K12
  • Right hand rotation (clockwise rotation)
  • Better handling and acceleration than 3-blade aluminum propellers that may flex under load.
  • Over 5x more durable than an aluminum propeller.
Fitment: Mercury Outboards: Mercury 25/60 HP  Outboard
  • 25HP Bigfoot/Command Thrust 4-Stroke
  • 30 HP 2-Stroke
  • 30 HP bigfoot/Command Thrust, 2010-Newer
  • 30-40 HP SeaPro/Marathon
  • 30 HP 4-Stroke, 1994-2005
  • 40-60 HP 2-Stroke and 4-Stroke, standard gearcase, 1977-Newer
  • 55 HP SeaPro/Marathon
  • 13 Tooth Spline
  • Note: This will only fit the 40-60 HP standard gearcase, it will not fit a 40-60 HP Bigfoot or Command Thrust gearcase


The Mercury Vengeance propeller is a great 3-blade propeller to use as a stainless steel upgrade from an aluminum propeller in a variety of applications. The Vengeance is a fine propeller for outstanding durability and good overall performance on most outboard and sterndrive powered boats.

  • Mercury 25hp Outboard Propeller
  • Mercury 30hp Outboard Propeller
  • Mercury 40hp Outboard Propeller
  • Mercury 50hp Outboard Propeller
  • Mercury 60hp Outboard Propeller


Flo-Torq® II: Hidden Protection

Mercury’s Flo-Torq propeller hub might just be the most important part you never see. Not only does it flex during shift changes, reducing noise and vibration. If your prop hits an underwater object, it sacrifices itself to save your lower unit. Just pop in a new hub and you’re back on the water, no service call needed. The Flo-Torq hub also makes Mercury propellers compatible with most engines on the market while also providing unmatched corrosion protection.


Mercalloy®: Patented Performance

We couldn’t find an aluminum alloy good enough for our propellers. So we invented one: Mercalloy Aluminum. So unique it’s patented, Mercalloy makes for higher-strength castings. Which allows for thinner blades that create less drag. Result? Optimal performance, optimal durability, better boating.


Built with pride in Fond du Lac, Wisconsin. Trusted everywhere.

How do you make a Mercury® propeller? One exacting step at a time. It starts with a prop mold. Cast in specially engineered hot wax using a 5,000-year-old technique. Reinforced with two ceramic finishes in an application process that takes two full days. Steam-heated in an autoclave at 325 degrees Fahrenheit and 100 PSI of pressure. And finally placed in a burnout furnace at more than 2000 degrees Fahrenheit – a heat that requires employees to wear aluminized protective clothing. Strengthened and shock-proofed, the mold is ready. Liquid stainless steel now fills the cavity, heated to 3000 degrees and dispensed in 50-pound dollops. Five hundred pounds of the molten metal pass through, creating 24 Mercury propellers. The freshly cast props cool on carts for about an hour. Then jackhammer-like knockout machines, abrasive saws, and sandblasters remove all traces of residual ceramic and oxidation. Machinists hone and prepare props for specific applications. And grinders thin leading blade edges and sand other areas. Next step: surface refinement. Two hours in a drag finish machine smoothes peaks and valleys, creating the matte finish of a Bravo Three® or pod-drive prop. Other propellers move on to a burnishing stage, gaining a high-luster finish. Fitting props with Performance Vent System plugs is the final step. They are now ready to be customized for better hole shot – and to deliver the superior performance Mercury owners around the world count on.

A Higher Grade of Performance

Mercury transforms aluminum and stainless steel into the highest-quality, best-performing, most-durable marine propellers in the world. Also the best-selling, no surprise. Our experience, expertise, and proprietary technologies – Flo Torq®, Mercalloy®, X7® alloy, and PVS® (Performance Vent System) – give you a true competitive advantage. For best overall boat performance, there’s no substitute for a Mercury Propeller.


Flo-Torq SSR

The Flo-Torq SSR utilizes Mercury’s proven Soft-Shift Rubber technology in a quiet hub kit that provides an NVH upgrade for Flo-Torq II hub applications where the maximum reduction of noise, vibration, and harshness is desired.

Helps preventing shifting noise and propeller rattle while providing maximum durability for smaller and mid-range horsepower outboards.

SSR Solid
Helps prevent shifting noise and propeller rattle while providing maximum durability in higher performance applications with 1” propeller shaft.

Helps prevent shifting noise and propeller rattle while providing maximum durability in higher performance applications with 1.25” propeller shaft.

Social Share

Additional information

Weight 5 kg
For Engine Brand





No. of Blades


Boat Types

, , , , , , , , ,


, , , ,


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.